Delphin Spa Shock Granules
Spa Shock granules are a chlorine-free shocking agent that you should use to oxygenate and disinfect cloudy bathing water and as a result, you can safely swim again after a short time.
You should choose Shock if you want a chlorine-free and fast shock treatment that is also odourless. After you have treated with Shock, you can swim after 6 hours.
Operating instructions Spa Shock
To add Spa Shock Granular, dissolve the granules in a bucket and then pour them slowly into the spa drain. You can bathe after 6 hours after adding the spa shock.
When adding new water, add 30 ml of granules per 1000 litres of water. For daily bathing, add 10 ml of granules per 1000 litres of water. If the water after bathing is to remain unused until the next day or even longer, add 30 ml of Shock per 1000 litres of water for post disinfection of the bathing water.
Follow the important rule for good and clear bathing water: always shower thoroughly before bathing. An unshowered person carries 200 times more pollution than a showered person.
Recommended values
You should therefore pay close attention to the dosage of spa chemicals and you should also regularly check and adjust the chlorine, pH and alkali levels to the recommended values:
Chlorine content 1,0-3,0 mg/l;
pH 7.0-7.4;
Alkalinity 80-120 mg/l.
Maintenance procedures Spa Shock
Every time you get cloudy water in your spa, you can use Shock granules.
Tips
When you use Delphin Spa Shock in your spa and when many people have bathed, we recommend adding Delphin Chlorine Granules or Oxi Booster to quickly achieve the highest level of hygiene in the water.
If you want to read more about care advice for hot tubs then click here.