Spakemi Delphin Spa Pipe Cleaner Cleaning Spa Pipe Cleaning

Spa Pipe Cleaner

It is very important that you clean your spa's pipe system 3-4 times a year and then you can advantageously choose Spa Pipe Cleaner because then you get a bacteria-free good bathing water.

This means that you should clean the spa's pipes when you change the water in the baths after 3 to 4 months, depending on how much and how many people use the spa.

Instructions for use

Before you start cleaning, fill the spa with water over all the jets and remove all the spa filters from the tank. Next, add 0.5 litres of Spa Pipe Cleaner per 1000 litres of spa water to the empty filter tank. Then run the jet for 10-15 minutes before switching off, draining the water and rinsing the spa thoroughly. Flush into the jet from the outside. if possible. If you have plenty of water, fill the bath again with fresh water, run the jet for a while and drain again because there is always some residual biofilm left in the system.

After this work, it is time to fill up with new bath water, which you shock treat with Oxi Booster or Spa Shock.

Filter tips when changing water

After cleaning, if you intend to change the filter, you can use the old filter for a day or so after cleaning before replacing it with a new one.

Recommended values

You should therefore pay close attention to the dosage and also regularly check and adjust the bromine, pH and alkali levels to the recommended values:
Bromine 2,0-4,0 mg/l;
pH 7.0-7.4;
Alkalinity 80-120 mg/l.

Maintenance

You change the bath water regularly and at the same time you clean the spa. You should use Delphin Spa Pipe Cleaner to clean the built-in pipe system. You do this 3-4 times a year. After cleaning, you take the opportunity to change the filters or clean them thoroughly.

Maintenance procedures

For more spa care advice, see if you click here.