Spakemi Delphin Spa Foam Fighter 1 litre

Delphin Spa Foam Fighter - foam fighter

If you have a layer of foam on your bath water, Spa Foam Fighter can solve the problem. The foam occurs as a result of cosmetics and soap residues being added to the bath. Thus, it is very important that you can explain to bathers to be careful to shower off soap residues and swimwear before bathing with clean water.

If you still get foam in the bath, you can remedy this with the Spa Foam Fighter. You should add 25-50ml of the foam fighter over the surface of the water while the spa is in operation.

Instructions for use

First, shake the bottle well before spraying the defoamer directly onto the foam, which then dissolves.
You can use defoamers whenever you feel the need.

Clean filter cartridges often or buy Cleaning-free filters

You should clean the dirty filter cartridge at regular intervals. Remove the filter from the container and rinse off any visible dirt that you see between the lamellae. After flushing, place the filter cartridge in a container and add filter cleaner according to the dosage instructions on the packaging.
After soaking in the solution for at least 12 hours, remove the filter and rinse it thoroughly under clean water. Now you have a cleaned spa filter ready for use.

Recommended values

You should therefore be careful with the dosage and you should also check and adjust the chlorine, pH and alkali levels regularly to the recommended values:
Chlorine content 1.0-3.0 mg/l
Bromine 2.0-4.0 mg/l
pH value 7.0-7.4
Alkalinity 80-120 mg/l

Maintenance

You change the bathing water regularly and at the same time you clean the spa. You should use Delphin Spa Pipe Cleaner to clean the built-in pipe system. You do this 3-4 times a year. After cleaning, you take the opportunity to change the filters or clean them thoroughly. After this work, it is time to fill up with new bath water that you shock treat with Oxi Booster or Spa Shock.

Maintenance procedures

For more spa care advice, see if you click here.