SpaCare Filter Cleaner 500 ml, Cleans spa filters

Filter Cleaner for spa filters

You should clean your filter cartridges with an effective and non-sudsing agent such as SpaCare Filter Cleaner. The purpose of your spa filter is to collect dirt and particles. The particles form a coating on the filter which eventually can no longer clean the water. Skin, conditioner and other greasy particles need to be removed, so use the SpaCare Filter Cleaner for clear and clean bathing water.

Instructions for use SpaCare Filter Cleaner

You should clean the dirty filter cartridge at regular intervals. Remove the filter from the container and rinse off any visible dirt that you see between the lamellae. After flushing, place the filter cartridge in a container and add SpaCare Filter Cleaner according to the dosage instructions on the packaging.
After soaking in the solution for at least 12 hours, remove the filter and rinse it thoroughly under clean water. Now you have a cleaned spa filter ready for use.

Maintenance

For your daily operation of the spa, you can advantageously have double filters. This means that you can quickly switch to clean filters. When using one cartridge as a filter, make sure to clean the other filter with SpaCare Filter Cleaner. After a week of use as a filter, the dirty cartridge is replaced by the clean cartridge in the cleaning tube, but it is clear that depending on how often you bathe, the need for you to change filters may vary.

Recommended values

You should therefore be careful with the dosage and you should also check and adjust the chlorine, pH and alkali levels regularly to the recommended values:
Chlorine content 1,0-3,0 mg/l;
pH 7.0-7.4;
Alkalinity 80-120 mg/l.

Shock chlorination

When using SpaCare products in your spa, you can add SpaCare MiniChlor or SpaChock at any time for shock chlorination and as a result you have clear and bacteria-free bathing water.

If you want to read more about SpaCare Filter Cleaner and other care tips for hot tubs then click here.