DELPHIN MultiChock 250g 3kg

DELPHIN MultiChock 250g 3 kg bucket

A very popular and effective chlorine tablet with five functions. Shock chlorination, long term chlorination, pH stabilisation, flocculation and algae prevention.

The tablet contains a fast-dissolving part for shock treatment and a slow-dissolving part that ensures thorough disinfection over time. The slow dissolving part contains, in addition to weekly chlorine, algaecides, flocculants and pH stabilisation.

Instructions for use  

MultiChock 250g Dosage: At the start of the season add 2 tablets of MultiChock per 25,000 litres of water. Thereafter: Add new tablets when 10% of the old one remains.

MultiChock 250g Handling: Place the tablet in the board drain or in the dosing float. Never add directly to the pool: danger of bleaching (especially for pools with liner). Check the chlorine level every three days and adjust the flow rate in the overflow or adjust the liquid chlorine distributor. The pool water should be shock treated with chlorine every 2-4 weeks, depending on the swimming load and water conditions.

Warning: 
Not to be used with other products. Once diluted in the pool, the product can be combined with others.
However, it cannot be filled at the same time.
Do not use pool water to water trees, shrubs and flowers.

Recommended values

You should therefore pay close attention to the dosage and also regularly check and adjust the chlorine, pH and alkali levels to the recommended values:
Chlorine 1,0-1,5 mg/l;
pH 7.0-7.4;
Alkalinity 80-120 mg/l.

General Maintenance Pool: 

The basis of good bathing water is the mechanical purification of the water. Make sure to clean the pool often and backwash the filter once a week (more often if necessary).

1. Keep the pool filter clean. The pool's filter system is essential for good water quality. Clean the filter regularly. A sand filter needs regular backwashing and the filter sand should be changed every two years. If you have a cartridge filter, clean the cartridges or replace them regularly. For cleaning filter cartridges and filter sand, use DELPHIN Filter Cleaner.

2. remove coarse dirt. Use a surface water or bottom bucket to remove coarse dirt. Clean the bottom of the pool with a bottom vacuum or pool robot.

3. remove grease marks and oil or soot contamination. These contaminants are usually found at the waterline. They are best cleaned with DELPHIN Cleaner Gel and an edge cleaning sponge. Leave the gel to work for a while for better results.

4. remove lime deposits or dried-on coatings. Remove pool wall and bottom deposits and brown stains with the acidic cleaner, DELPHIN Poolrent. Use a sponge or brush that is soft enough not to damage the pool liner. To remove deposits, it is usually necessary to lower the water level. For in-ground pools, it is important to consider stability. Rinse the pool thoroughly with fresh water before refilling it to avoid foaming.