Filter maintenance - Cleaning of spa filters

Cleaning the filters is important. The spa filters and filtration play a crucial role in producing clean and fine spa water together with the chemicals. The logic is simply that the more the filter pump is running, the cleaner the water you get.

You should therefore clean the dirty filter cartridge at regular intervals. To do this, remove the filter from the container and rinse off any visible dirt that you see between the discs. After rinsing, place the filter cartridge in a container and add the following ingredients Filter Cleaner according to the dosage instructions on the package.

After soaking in the solution for at least 12 hours, remove the filter and rinse it thoroughly under clean water. Now you have a cleaned spa filter ready for use.

• Ensure that the filter pump runs for the number of hours specified by the manufacturer. This is usually set at the factory, but depending on how much the owner of the spa bathes, the filtration cycle can be adjusted. Contact the supplier of the spa to find out the facts about your particular model or the answers can be found in the instruction manual.
• A filter that is too dirty will not work. It is therefore recommended that you have at least 2 filters at home "in stock" meaning that you always have a working one that can be used when the other one is being cleaned.
• How often should the filter be cleaned? There is no exact answer. Cleaning intervals depend on the amount of load and use of the spa. However, a rule of thumb is to try to clean the spa filter at least once a month.

Quick cleaning of washable filters:

Flush the filter so that the water enters properly into the folds of the spa filter. Connect the garden hose to the filter washing. Distribute Delphin spafilter cleaner evenly over the spa filter. Leave to work for 10 minutes before washing the filter with the water walls with water turned on in the hose.